RSE CCNA 2 thing 6 Quiz answer 2018 2019
Which distinct form of VLAN is provided by an administrator to accessibility and configure a switch?default VLANnative VLANdata VLANmanagement VLAN
A monitoring VLAN is provided to remotely accessibility and configure a switch. Data VLANs are supplied to separate a network into groups of individuals or devices. The default VLAN is the early stage VLAN every switch ports are inserted in when loading the default construction on a switch. The 802.1Q stems port places untagged traffic on the aboriginal VLAN.
Which step must be performed very first when deleting a VLAN that has member move ports?Reload the switch.Implement the command delete vlan.dat.Reassign all VLAN member ports come a different VLAN.Backup the running-config.
Before deleting an energetic VLAN, the is recommended that all ports currently assigned together a member of that VLAN be reassigned. Any kind of port that is a member that a VLAN that is deleted will end up being unusable.
Match the action to the corresponding command. (Not all alternatives are used.)assigns VLAN 10 for untagged web traffic —> Switch(config-if)# switchport trunk aboriginal vlan 10activates the present interface as trunk —> Switch(config-if)# switchport setting trunkprohibits VLAN 10 top top the trunk interface —> Switch(config-if)# switchport trunk enabled vlan remove 10
Refer come the exhibit. I m sorry implementation the inter-VLAN routing go this topology use?
The gig0/0 user interface does not assistance inter-VLAN routing.The no shutdown command has not to be configured.The IP attend to on CiscoVille is incorrect.The encapsulation dot1Q 20 command has not been configured.
The actions to configure inter-VLAN routing have to be completed in a specific order. Prior to configuring an IP attend to on a subinterface, the encapsulation dot1q VLAN_id command need to be mentioned first.
In which location are the normal variety VLANs save on computer on a Cisco move by default?flash memorystartup-configrunning-configRAM
Normal variety VLANs space stored in a file called vlan.dat and located in the flash memory.